image001
bp_BTChallenge
bp_content_aboutus_image
bp_ph_aus11
bp_oil
BuiltByNOF
 Enerpar M 1930

 

 

SAFETY DATA SHEET

___________________________________________________________________________

 

Enerpar M 1930

 

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Identification of substance/preparation

Enerpar M 1930

 

Application

Medicinal white oil.

For specific application advice see appropriate Technical Data Sheet or consult your BP representative

 

Company Identification

BP Southern Africa (Pty) Ltd

61 St. George's Mall

Cape Town 8001

 

Emergency Telephone Number

0860 222 166 (BP Southern Africa)

_________________________________________________________________________________

 

2. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Composition

High pressure hydrogenated mineral oil. Manufactured to British Pharmacopoeia standards.

 

Hazardous Components

No component is present at sufficient concentration to require a hazardous classification.

_________________________________________________________________________________

 

3. HAZARDS IDENTIFICATION

This material is not considered to be hazardous, but should be handled in accordance with good industrial hygiene and safety practices.

_________________________________________________________________________________

 

4. FIRST-AID MEASURES

Eyes

Wash eye thoroughly with copious quantities of water, ensuring eyelids are held open. Obtain medical advice if any pain or redness develops or persists.

 

Skin

Wash skin thoroughly with soap and water as soon as reasonably practicable. Remove heavily contaminated clothing and wash underlying skin.

 

Ingestion

If contamination of the mouth occurs, wash out thoroughly with water.

Except as a deliberate act, the ingestion of large amounts of product is unlikely. If it should occur, do not induce vomiting; obtain medical advice.

 

Inhalation

If inhalation of mists, fumes or vapour causes irritation to the nose or throat, or coughing, remove to fresh air. If symptoms persist obtain medical advice.

 

Medical Advice

Treatment should in general be symptomatic and directed to relieving any effects.

Repeated ingestion of significant quantities of product may interfere with absorbtion of the fat soluble vitamins A, D, E and K, and could result in hypo-vitaminosis.

_________________________________________________________________________________

 

5. FIRE-FIGHTING MEASURES

Use foam, dry powder or water fog. DO NOT USE water jets.

FIRES IN CONFINED SPACES SHOULD BE DEALT WITH BY TRAINED PERSONNEL WEARING APPROVED BREATHING APPARATUS.

Water may be used to cool nearby heat exposed areas/objects/packages. Avoid spraying directly into storage containers because of the danger of boil-over.

 

Combustion Products

Toxic fumes may be evolved on burning or exposure to heat.

See Stability and Reactivity, Section 10 of this Safety Data Sheet.

_________________________________________________________________________________

 

6. ACCIDENTAL RELEASE MEASURES

Contain and recover spilled material using sand or other suitable inert absorbent material.

It is advised that stocks of suitable absorbent material should be held in quantities sufficient to deal with any spillage which may be reasonably anticipated.

Spilled material may make surfaces slippery.

Protect drains from potential spills to minimise contamination. Do not wash product into drainage system.

In the case of large spills contact the appropriate authorities.

In the case of spillage on water, prevent the spread of product by the use of suitable barrier equipment. Recover product from the surface. Protect environmentally sensitive areas and water supplies.

_________________________________________________________________________________

 

7. HANDLING AND STORAGE

Handling Precautions

Avoid contact with eyes. If splashing is likely to occur wear a full face visor or chemical goggles as appropriate.

Avoid frequent or prolonged skin contact with fresh or used product.

Good working practices, high standards of personal hygiene and plant cleanliness must be maintained at all times.

Use disposable cloths and discard when soiled. Do not put soiled cloths into pockets.

 

Fire Prevention

Product contaminated rags, paper or material used to absorb spillages, represent a fire hazard, and should not be allowed to accumulate. Dispose of safely immediately after use.

 

Storage Conditions

Store under cover away from heat and sources of ignition.

_________________________________________________________________________________

 

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Limits

Ensure good ventilation.

Avoid, as far as reasonably practicable, inhalation of vapour, mists or fumes generated during use.

If vapour, mists or fumes are generated, their concentration in the workplace air should be controlled to the lowest reasonably practicable level.

 

Comply with current local occupational exposure limit. Where not established, it is recommended that mineral oil mists are kept below 5mg/m3 (8 hr TWA).

 

Protective Clothing

Wear face visor or goggles in circumstances where eye contact can accidentally occur.

Change heavily contaminated clothing as soon as reasonably practicable; dry clean, launder and preferably starch before re-use. Wash any contaminated underlying skin with soap and water.

 

Respiratory Protection

Respiratory protection is unnecessary, provided the concentration of vapour, mists or fumes is adequately controlled.

The use of respiratory equipment must be strictly in accordance with the manufacturers' instructions and any statutory requirements governing its selection and use.

_________________________________________________________________________________

 

 

9. PHYSICAL AND CHEMICAL PROPERTIES

Typical Values

 

 

 

 

 

 

Grades:Enerpar M 1930

 

 

 

 

 

 

 

Test Method

Units

 

 

 

 

 

 

Physical state

liquid

Colour

colourless

Odour

odourless

 

 

Kinematic viscosity @ 40C

ASTM D 445

mm2/s

71

 

 

 

Pour point

ASTM D 97

C

-12

 

 

 

Flash point (PMC)

ASTM D 93

C

230

 

 

 

Density @ 15C

ASTM D 1298

kg/m3

868

 

 

 

Solubility in water

 

g/l

<0.1

 

 

 

 

 

10. STABILITY AND REACTIVITY

Products of this type are stable and unlikely to react in a hazardous manner under normal conditions of use.

Hazardous polymerisation reactions will not occur.

This material is combustible.

 

Materials to Avoid

Avoid contact with strong oxidizing agents.

 

Hazardous Decomposition Products

Thermal decomposition products will vary with conditions.

Incomplete combustion will generate smoke, carbon dioxide and hazardous gases, including carbon monoxide.

_________________________________________________________________________________

 

11. TOXICOLOGICAL INFORMATION

Eyes

Unlikely to cause more than transient stinging or redness if accidental eye contact occurs.

 

Skin

Unlikely to cause harm to the skin on accidental contact.

Medicinal white oils are used in some skin creams.

 

Ingestion

Unlikely to cause harm if accidentally swallowed in small doses, though larger quantities may cause nausea and diarrhoea.

Product is not hazardous when used as directed by a medical practitioner.

 

Inhalation

At normal ambient temperatures this product will be unlikely to present an inhalation hazard because of its low volatility.

May cause irritation to eyes, nose and throat due to exposure to vapour, mists or fumes.

May be harmful by inhalation if exposure to vapour, mists or fumes resulting from thermal decomposition products occurs.

_________________________________________________________________________________


12. ECOLOGICAL INFORMATION

Mobility

Spillages may penetrate the soil causing ground water contamination.

 

Persistence and degradability

This product is inherently biodegradable.

 

Bioaccumulative potential

There is no evidence to suggest bioaccumulation will occur.

 

Aquatic toxicity

Spills may form a film on water surfaces causing physical damage to organisms. Oxygen transfer could also be impaired.

_________________________________________________________________________________

 

13. DISPOSAL CONSIDERATIONS

Where possible, arrange for product to be recycled.

Dispose of via an authorised person/ licensed waste disposal contractor in accordance with local regulations.

Incineration may be carried out under controlled conditions provided that local regulations for emissions are met.

_________________________________________________________________________________

 

14. TRANSPORT INFORMATION

Not classified as hazardous for transport (ADR, RID, UN , IMO, IATA/ICAO).

_________________________________________________________________________________

 

15. REGULATORY INFORMATION

Not classified as hazardous for supply.

 

National legislation: Occupational Health and Safety Act (Act 85 of 1993)

_________________________________________________________________________________

 

16. OTHER INFORMATION

Compiled by:

Product Stewardship Group

BP Oil Technology Centre

Chertsey Road

Sunbury-on-Thames

Middlesex, TW16 7LN

 

This data sheet and the health, safety and environmental information it contains is considered to be accurate as of the date specified below. We have reviewed any information contained herein which we received from sources outside the BP Group of Companies. However, no warranty or representation, express or implied is made as to the accuracy or completeness of the data and information contained in this data sheet.

 

Health and safety precautions and environmental advice noted in this data sheet may not be accurate for all individuals and/or situations. It is the user's obligation to evaluate and use this product safely and to comply with all applicable laws and regulations. No statement made in this data sheet shall be construed as a permission, recommendation or authorization given or implied to practise any patented invention without a valid licence. The BP Group shall not be responsible for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from any hazards inherent in the nature of the material.

 

[BP Atlantic] [Product Safety Data Sheet] [Depots]